Documentos |
Cada uno de los siguientes documentos pueden ser solicitados via correo electrónico, indicando el Nº de Documento, seguido de su Titulo. |
|
Ejemplo: DOC 11 - Corrosion and protection of metals in te rural atmosphere of El Prado, spain
|
DOC |
TITULO |
1 |
Uso de PLC'S en protección catódica del sistema de transporte de hidrocarburos por ducto en la región marina noroeste de PEMEX exploración y producción |
2 |
Electrochmeical chloride extraction (ECE) - A viable technology for extending the service life of chloride contamined reinforced concrete structures. |
3 |
Kinetics of structural rust transformation in environments containings chloride and SO2. |
4 |
Evolution in time of the anodic behavior of passive materials and its effect on corrosion potential in natural water.. |
5 |
The oxide film on Copper in NaOH: In-situ photoermal spectroscopy, XPS and ERD studies |
6 |
Combustion of coal volatiles affecting materials performance in atmospheric fluidized beds |
7 |
Cathodic protection efficiency comparision between conventional shallow groundbed and deep groundbed anodes installation in petrochemical plants |
8 |
Influence of an acid pH and deaeration on the in vitro corrosion behaviour of different metallic materials |
9 |
A comparative study of the anticorrosive performance of different phosphate pigments (PATINA/CYTED Project) |
10 |
Zinc molybdenum phosphate as a corrosion inhibitor in paintsE |
11 |
Corrosion and protection of metals in te rural atmosphere of El Prado, spain. |
12 |
An X - ray diffraction study of corrosion products from low carbon steel. |
13 |
Study of the corrosion products formed on carbon steels in the tropical atmosphere of Panama. |
14 |
Electrochemical noise (EN) evaluation of anodized aluminum of PATINA Project. |
15 |
Influence of chloride ions on atmospheric corrosion of mild steeel, copper and aluminum. |
16 |
Prevention and protection of the effects of biocorrosion and biofouling minimizing the environmental impact |
17 |
Protection and prevention of the Ibero American cultural heritage |
18 |
Influence of temperature on the galvanic current induced by a localized repair when using primers to the reinforcement |
19 |
Effect of pozzolans on the performance of fiber-reinforec mortars. |
20 |
Chloride binding capacity of blended mortars. |
21 |
Influence of pozzolanic ternary mixtures on the strength and durability of mortars |
22 |
Synthesis and Mossbauer characterization of Cu and Cr dopped magnetites |
23 |
Corrosion related iron oxides: Cu, Mn and Cr dopped hematite |
24 |
Assessment of the behaviour of reinforced concrete slabs exposed to aggressive industrial environments, using four methods of corrsion prevention. |
25 |
Description of protection mechanisms of zinc chromate anticorrosive pigments by electrochemical impedance spectroscopy (E.I.S.) |
26 |
Ventajas del análisis Wavelet sobre el análisis de Fourier para la interpretación del ruido electroquímico |
27 |
Propiedades fractales y caóticas del ruido electroquímico del aluminio en condiciones de pasivación. |
28 |
Improvement analysis of RPC S.A. pipeline cathodic protection system. |
29 |
Study of the corrosion level of the metallic structure of a historical building in the Chihuahua City. |
30 |
Guide to Residential Cast-In-Place Concrete Construction - ACI 332R-84 |
31 |
Damage mechanisms of Cr-Ni alloys of pyrolisis furnaces tubes failed in service. |
32 |
Design, construction and evaluation of a device to study stress corrosion cracking. |
33 |
Test method for evaluating underground pipeline coating |
34 |
EIS study of the electrochemical behaviour of copper in presence of different environment pollutants |
35 |
Determination of coatings properties with electrochemical measurements |
36 |
Study of the passive layers on titanium base alloys for biomedical implant aplications |
37 |
EIS study of zinc powder corrosion and passivation in neutral solution |
38 |
An electrochemical investigationof the corrosion behavior of Al-Si-Cu hypereutectic alloys in alcoholic environments. |
39 |
Corrosion resistance of materials used in ear piercing studs. |
40 |
Electrochemical assessment of magnetite paints dopped with copper and chromium. |
41 |
Effect of the pollutants of the atmosphere on the corrosion of the low carbon steel copper zinc and aluminum. |
42 |
Factores operacionales que afectan el comportamiento del acero galvanizado por inmersión en caliente. |
43 |
Study of the atmospheric corrosion performance of zinc and aluminum coated carbon steels. |
44 |
Crude unit overhead corrosion experience, top pump around, El Palito Refinery |
45 |
Cavitation - corrosion in pumping equipment. |
46 |
Coating evaluation for the protection of substations and energy transmission towers |
47 |
Research about the use of wet sand balsting as an option to sand blasting in Colombia |
48 |
Estudio de corrosión atmosférica en torres de transmisión de energía |
49 |
Atmospheric corrosion in the industrial zone of "Mamonal" - coatings evaluation - "Cazim". |
50 |
Implementación de técnicas electroquímicas para el monitoreo de corrosión en patas de torres de transmisión. |
51 |
Corrosion risks assessment in the operations of gas production in AMOCO's Opon field. |
52 |
Hydrogen absorption in reinforcing steel exposed to environments simulating concrete. |
53 |
Impedance and noise electrochemical analysis of thin polymeric films desposited by plasma on steel and aluminum alloys. |
54 |
Electrochemical evaluation of pipelines materials of Miravalles geothermal field. |
55 |
Measuring naphthenic acid corrosion potential with the Fe powder test. |
56 |
Corrosion of copper in simulated uterine fluid. |
57 |
Aspectos cinéticos de la corrosión atmosférica del acero al carbono, cobre, zinc y aluminio. |
58 |
Stray current induced corrosion in lightning rod cables of 225 kV power lines towers: a case study. |
59 |
Grooving corrosion of weldments in CO2 environments in crude oil pipelines. |
60 |
Copper corrosion in contraceptive intrauterine devise exposed to sanguineous media. |
61 |
Use of zincrich primers co-pigmented with phosphates applied on rusting steel surfaces contamined with soluble salts. |
62 |
La-joint corrosion of 55% Al-Zn and hot dip galvanized materials. |
63 |
Behaviour of painted aluminium in Iberoamerican atmospheres |
64 |
Optimization of the cathodic protection monitoring systems in transmission sub-station. |
65 |
Study on cathodic and corrosion kinetics of carbon steel in CO2 containing solutions, using the rotating cylinder electrode. |
66 |
Anticorrosive protection system of the Ministry of Sidero-Mechanical Industry and electronic of the Republic of Cuba. |
67 |
Marine bactaria and localized corrosion of steels. |
68 |
Resistencia a la corrosión de acero inoxidable enterrado y su protección catódica. |
69 |
Weathering of coil-coatings: UV radiation and thermal effects. |
70 |
Study of the effect of organic and inorganic inhibitors of corrosion in reinforced concrete. |
71 |
Evaluation of corrosion inhibitors by electrochemical potential and ultrasonic energy measurements. |
72 |
Electrochemical behavior of aluminium anodes (Al-Zn-In) in natural waters. |
73 |
Diagnóstico, patologías y corrosión en armaduras de hormigón armado y su rehabilitación. |
74 |
Construction of a Geographical Information System for corrosion diagnosis, evaluation and control in gas pipelines of Santander. |
75 |
Guide for design and construction of concrete parking lots 9ACI 330R-01). |
76 |
Use of stainless steels in Colombia. |
77 |
Building Code requirements for structural concrete (ACI 318-02) and Commentary (ACI 318R-02). |
78 |
Electrochemical assessment for some titanium and Stainless Steel implant dental alloys. |
79 |
Environmentally - friendly organic coatings for structural steel to be exposed in atmosphere. |
80 |
Electrical conductivity and chloride diffusivity in concrete and mortars as function of design parameters. |
81 |
Electrochemical, gravimetric and X-Ray characterization of low carbon steel corrosion products after atmospheric exposure in the Caribbean Area. |
82 |
Protección anticorrosiva con recubrimientos para cascos de barcos. Parte I y II. |
83 |
Design of team to apply continuous lining in external surfaces of installed pipes. |
84 |
Anticorrosive protection by means of coating paints in the mining industry. |
85 |
Details and Detailing of Concrete Reinforcement (ACI 315-99) |
86 |
Consideraciones acerca del Proyecto Corrosión Atmosférica en la zona industrial de Mamonal - Proyecto CAZIM. |
87 |
Image analysis coupled to gravimetry for improved determination of metal corrosion rates. |
88 |
Low carbon steel corrosion damage prediction in rural and urban environments. |
89 |
Nueva imprimación anticorrosiva base agua. |
90 |
Protective properties of plasma - polymerised coatings used as pre-treatment for aluminium alloys. |
91 |
Commentary on Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials (ACI 313-97). |
92 |
Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials (ACI 313-97). |
93 |
Specifications for structural concrete (ACI 301-99). |
94 |
Guide for the use of Silica flume in concrete. |
95 |
Ground granulated blast-furnace slag as a cementitious constituent in concrete. |
96 |
Influence of microstructure and extrusion ratio on the corrosion behavior of spray-deposit Al-Si alloys. |
97 |
Aminoalcohol technology as flash-rust inhibitor for the hydrotreatment of metallic surfaces. |
98 |
Accelerated tests of coil coatings. |
99 |
Automation of marine environmental simulating machine for concrete corrosion measurement, using an intelligent fuzzy control. |
100 |
Correlation between electrochemical digital signals and digital images about the behavior of the corrosion on 316 stainless steel. |
101 |
PATINA Network - Performance of coil coating in natural atmospheres of Iberoamerica |
102 |
Corroison rate evaluation with pipelines corrosion inhibitors by electrochemical methods. |
103 |
Desmpenho a corrosao de esquemas de pintura con tintas de base aquosa e convencionais a base de solventes organicos. |
104 |
Interference, leaking or telluric currents. |
105 |
Infliuence of conditions on the conservation of paints. |
106 |
Atmospheric corrosion of galvanized steel in coastal and industrial zones of Valparaiso, Chile. |
107 |
Maintaining efective cooling system performance when using contaminated makeup water. |
108 |
Corroison and paint under the perspective of aeronautic security. |
109 |
Analysis of coatings appearance and durability testing induced surface defects using image capture/processing/analysis. |
110 |
Influence of turbulent flow on the localised corrosion processes of mild steel with inhibited aqueous CO2 systems. |
111 |
Characterisation of SRB membrane proteins by SDS-page. |
112 |
Crude unit corrosion and corrosion control. |
113 |
Influencia del fosfato de zinc en resitenccia ohmica de las pinturas epoxidicas.G. |
114 |
New technology implementation for the preventive - predective maintenance in hydrocarbon pipelines. |
115 |
Evaluacion del avance de la corrosion de refuerzos en estructuras de hormigon. |
116 |
Selective silver dissolution in Ag-Pd dental alloys.G |
117 |
Sistemas de proteccion de superficies en ambientes agresivos.G |
118 |
Application of polypyrrole films in the corrosion protection of aluminium and its alloys. |
119 |
Electochemical bahaviour of SA213-T22 steel in a synthetic salt and fuel oil ash from 540o to 680o C. |
120 |
Changes in the morphology of porous anodic films formed on aluminium in natural and artificial ageing. |
121 |
Self-sealing of unsealed aluminium anodic oxide films in very different atmospheres. |
122 |
uses of plasma and ion implantation for the hard anti-corrosion coating development. |
123 |
High temperature oxidation of a Fe-13Cr alloy with small additions of rare earth. |
124 |
Performance of powder coatings applied on steel and electogalvanized steel surfaces with different pre-treatments. |
125 |
Influence of Yttrium on the high temperature oxidation and sulphidation bahavior of Fe-20Cr alloys. |
126 |
Carburization of austenic and ferritic alloys in hydrocarbon environments at high temerature. |
127 |
Estudio de permeación de hidrógeno en Paladio expuesto en un cultivo de bacterias sulfato-reductoras |
128 |
La corrosión en el sector eléctrico cubano: estudio de caso. |
129 |
Comparative study of protective coatings applied on weathered galvanized structures contamined with soluble salts. |
130 |
Use of PLC's in cathodic protection of the hydrocarbon tranport system by pipeline in the northeast marine region of PEMEX exploration and production. |
131 |
Corrosion failure in collapsed lattice boom crane. |
132 |
Evaluation of the passivating action of an organic inhibitor on concrete reinforcement steel. |
133 |
Evaluation and monitoring of corrosion failure in a worm of 316 stainless steel. |
134 |
SCC study in 17- 4PH and 17- 7PH stainless steels in NaCl and NaOH solutions. |
135 |
Evaluación del grado de sensibilización en nel acero inoxidable AISI 304. |
136 |
Explicación del comportamiento electroquímico del acero de refuerzo embebido en concreto mediante la interpretación de los espectros de impedancia electroquímica. |
137 |
Evaluation of coatings aluminium base on low carbon steel. |
138 |
Performance of thermal-sprayed zinc anodes with and without humectants cathodic protection systems. |
139 |
Anticorrosive performance of conventional paint systms and new technologies for painting in a rural atmosphere. |
140 |
A study of mortars prepared with fly ash and silica fume for use in structures exposed to marine envirnments. |
141 |
Problemas de corrosión y formas de solución en una refinería colombiana. |
142 |
CO2 corrosion. The influence of microstructure. |
143 |
Tele-studies of corrosion by constant extension rate tests using an electronic machine remotely connected. |
144 |
Robotics and telepresence technologies to corrosion study applications. |
145 |
In situ characterization of patinas formed on statuary alloys in laboratory and Buenos Aires city monuments. |
146 |
Boiler precision system. Automated control system for coordinated phosphate/pH chemical treatment programs. |
147 |
Technological advnaces in pipeline integrity assessment & remote monitoring |
148 |
Non-contact one-sided evaluation of hidden corrosion in metallic constructions by using transient infrared thermography. |
149 |
Novel approaches to observation of thin films on semiconductors and metals. |
150 |
Aplicacao de técncias electroquímicas no estudo da corrosao em laboratório e no campo. |
151 |
Concrete deterioration in a drinkable water treatment plant. |
152 |
Ensaios de corrosao atamoférica com aco revestido com aluminío, zinco e suas ligas por processo contínuo. |
153 |
Comparation of 9 Cr-1Mo grade T9 between service and theoretical depth carburized layer. |
154 |
Applications of optical interferometry in corrosion science and engineering. |
155 |
Redution of air pollutants - A tool for control of atmospheric corrosion. |
156 |
Porous anodic film formation on an Al-3,5 wt% Cu alloy. |
157 |
Soluble salts: their incidence on the protection of metallic structures by paint coatings. |
158 |
Long-term performance of different aluminium alloy designs as sacrifical anodes for rebars. |
159 |
Effect of supplementary cementing materials on the concrete corrosion control. |
160 |
Controlled Low-Strength Materials (ACI 229R-99) |
161 |
Biocorrosion and biofouling of metals and alloys of industrial usage. Present state of the art at the beginning of the new millennium. |
162 |
Effect of supplementary cementing materials on the concrete corrosion control. |
163 |
Lining sour crude oil storage tank bottoms with spray applied fiberglass reinforced epoxy to maximize service life. |
164 |
Modelling of roughness effect on hydrogen permeation in a low carbon steel. |
165 |
Simulation tests for tropical environments - comparing laboratoy and field test. |
166 |
Whitening of car bumpers under solar exposure. |
167 |
Electro-electronic materials - Case histories. |
168 |
Effects evaluation of ultraviolet radiation on polymeric materials of photocontrol devices in Brazilian environments. |
169 |
VRLA batteries influence from environment conditions. |
170 |
Biodeterioration of electronic components in tropical environments. |
171 |
Electrolytic reduction technique in the characterization of anodically formed oxides on copper. |
172 |
Copper corrosion by hydrogen sulphide and acetic acid vapor in a flowing mixed gas chamber. |
173 |
Nanoscopic studies of stainless stell electropolishing. |
174 |
Synthesis, structure and stability of MoCl5 - graphite intercalation compounds. |
175 |
Superstructure and boundary structure in stage 4 MoCl5 - graphite intercalation compounds studied by atomic force microscopy and scanning tunnleing microscopy. |
176 |
Effect of oxygen plasma treatment on gas adsoption behavior and surface structure of carbon spheres derived from phenol resin. |
177 |
Nanoscopic studies of stainless steel electropolishing. |
178 |
Effect of supplementary cementing materials on the concrete corrosion control. |
179 |
Electrochemical chloride extraction (ECE) - A viable technology for extending the service life of chloride contaminated reinforced concrete structures. |
180 |
Guide to the selection and use of hydraulic cements (ACI 225R-99) |
181 |
Investigations about the chloride transformation during the electrochemical choride extraction process. |
182 |
Current R & D work on the use of stainless steel in construction in Finland. |
183 |
Control of cracking in concrete structures. |
184 |
Standard Practice for the Use of Shrinkage-Compensating Concrete (ACI 223-98) |
185 |
Protection of Metals in Concrete Against Corrosion (ACI 222R-01) |
186 |
Guide for Use of Normal Weight and Heavyweight Aggregates in Concrete. |
187 |
Erosion of Concrete in Hydraulic Structure (ACI 210R-93) |
188 |
Cement and Concrete terminoogy (ACI 116R-00) |
189 |
Threshold Chloride Content for Corrosion Steel in Concrete: A Literature Review. |
190 |
Corrosion of Embedded Material Other Than Reinforcing Steel. |
191 |
A Rapid Method for Studying Corrosion Inhibition of Steel in Concrete. |
192 |
Corrosion of Aluminum Conduit in Concrete. |
193 |
Influence of the Cement on the Corrosion Behavior of Steel in Concrete |
194 |
Corrosion of Prestressed Wire in Concrete. |
195 |
Initiation of pitting Corrosion on zinc in Neutral Inhibited Conditions. |
196 |
Organic matter and copper corrosion by-product release: a mechanitic study. |
197 |
Reglas de Oro de la Durabilidad. |
198 |
Reparación de elementos de hormigón armado y metálicos afectados por la corrosión: Central Digital Aguila y Dragones. |
199 |
Caustic stress corrosion cracking of nickel-rich, chromium-bearing alloys. |
200 |
Aleaciones y el cuerpo humano. |
201 |
Análisis de fallas en materiales. |
202 |
Effect of heat treatment on filiform corrosion of aluminium ally AA3005. |
203 |
Influence of heat treatment and surface conditioning of filiform corrosion of aluminium alloys AA3005 and AA5754. |
204 |
Effect of thermo-mechnical processing on filiform corrosion of aluminium alloy AA3005. |
205 |
Filiform corrosion of binary aluminium model alloys. |
206 |
Filiform corrosion of AA3005 aluminium analogue model alloys. |
207 |
In situ measurement of oxide film growth on aluminium samples by holographic interferometry. |
208 |
Application of scanning Kelvin probe to study the corrosion protection of chromated hot-dip galvanized steel. |
209 |
Effect of Ag+ in concentration on the stress corrosion carcking susceptibility of Ag - Cd alloys in AgNO3 and AgClO4 aqueous solutions. |
210 |
The corrosion behaviour of titanium dibirode in neutral chloride solution. |
211 |
An XPS study of copper corrosion originated by formic acid vapour at 40% and 80% relative humidity. |
212 |
Productos para la protección anticorrosiva a partir de la Industria Azucarera. |
213 |
Copper end termination materials for base metal electrode capacitors. |
214 |
Intervención en el patrimonio moderno: Edificio de Viviendas Riomar. |
215 |
Rehabilitación y modernización del Túnel de la Bahía de La Habana. |
216 |
Teatro Karl Marx: Reparación y Restauración de Fachadas Afectadas. |
217 |
Effect of heat treatment on electrochemical behaviour of aluminium alloy AA3005. |
218 |
Concrete Constructability and Durability: Impact of Self-Consolidating Concrete and Innovative Admixture Technologies. |
219 |
Solución anticorrosiva a la compuerta del Canal de Paso Malo. |
220 |
Corrosión en ambientes geotérmicos. |
221 |
Corrosión en la industria del papel. |
222 |
Corrosión en la industria electrónica. |
223 |
Effect of alloying Cu on the corrosion resistance of stainless steels in chloride media. |
224 |
Appearance of a negative loop on the polarization curves of Pd78Si16Cu6-xCrx amorphous alloys in phosphate buffered saline solution. |
225 |
The influence of chromium on the atmospheric corrosion of steel. |
226 |
Cromatizado de superficies metálicas. |
227 |
Cromatizado de superficies metálicas (II Parte) |
228 |
Cromatizado de superficies metálicas (III Parte) |
229 |
In situ study of selective dissolution of duplex stainless steel 2205 by electrochemical scanning tunnelling microscopy. |
230 |
Runoff rates, chemical speciation and bioavailability of copper released fron naturally patinated copper. |
231 |
Estado de la normativa en el campo de la durabilidad de las estructruas de hormigón. |
232 |
Inhibition of 5083 aluminium alloy and galvanised steel by lanthanide salts. |
233 |
Pitting corrosion of 304 stainless steel after laser surface melting in Argon in nitrogen atmospheres. |
234 |
Diagnóstico de corrosión en estructuras de hormigón armado construidas en El Vedado en el siglo XX. Valoraciones. |
235 |
Restaurante 'La Divina Pastora". Lesiones constructivas. |
236 |
Nueva imprimación anticorrosiva base agua. |
237 |
Einfluss der Oberflachenbehandlung auf den Fotoeffekt un die Potentialverteilung an Kupperrohren. |
238 |
Experiencias en la realización de estudios diagnósticos de corrosión. |
239 |
Patologías de puentes. |
240 |
Estudio diagnóstico de nave de almacén dañada por incendio. |
241 |
Influence of Chromium additions on teh oxidation resistance of an Austenitic Fe-30Mn-5Al alloy. |
242 |
Intervención realizada en el Instituto Superior de Arte. |
243 |
Evaluación de estructuras de concreto reforzado previa a su rehabilitación. |
244 |
Patología de estructuras de concreto reforzado. |
245 |
La Normalización y la Corrosión. |
246 |
The influences of microstructure and nitrogen alloying on pitting corrosion of type 316L and 20 wt.% Mn-substituted type 316L stainless steels. |
247 |
die Lochkorrosionsbegrenzung bei hochlegierten Sonderedelstahlen and NiCrMo- Legierungen in Chloridlosung-Einflussfaktoren und Ausmass. |
248 |
Influence of laser surface melting on the susceptibility to intergranular corrosion of sensitized alloy 600. |
249 |
Rehabilitación de estructuras de hormigón reforzado. |
250 |
Inhibition of the corrosion process of alloy AA5083 (Al-Mg) in seawater by cerium cations. An EIS study. |
251 |
Using EIS to study the electrochemical response of alloy AA5083 in solutions of NaCl. |
252 |
La Durabilidad en Obras y Puentes. |
253 |
Nuevos productos para el sellado de juntas en infraestructuras, edificación e industria. |
254 |
Oxidation behaviour of an austenitic F3-3)Mn-5Al-0.5C alloy. |
255 |
Electrochenical impedance models for molter salt corrosion. |
256 |
Corrosion of ASI 304 stainless steel induced by thermophilic sulfate reducing bacteria (SRB) from a geothermal power unit. |
257 |
Mechanochemical model to predict stress corrosion crack growth of stainless steel in high temperature water. |
258 |
Pitting corrosion of A357 aluminium alloy obtained by semisolid processing. |
259 |
Pitting and stress coorison carcking resistance of friction ster welded Al5083. |
260 |
Protección anticorrosiva mediante pinturas de una estación de secado y enfriado de azúcar. |
261 |
Tratamiento y soluciones técnicas para la corrosión aplicadas en el Proyecto de Rehabilitación del Edificio FOCSA. |
262 |
Fábrica de primarios anticorrosivos de base furánica. |
263 |
Edificio Atlantic. Protección contra la corrosión. |
264 |
Problemas de corrosión más importantes durante la fabricación de azúcar de caña. |
265 |
Desarrollo de los aditivos superplastificantes. La última generación. |
266 |
Repair of damage vivianite coatings on mild steel using bacterias. |
267 |
Procesos y productos especiales en las soluciones técnicas de la construcción. |
268 |
Surgidero de Batabanó. Lesiones constructivas. |
269 |
Templado de acero utilizando gases ligeros. |
270 |
Corrosive inoganic contamination on water surfaces after nickel-iron electroplating formation mechanisms and prevention. |
271 |
Corrosion behavior of TiN-coated 304 stainless steeel. |
272 |
Runoff rates and ecotoxicity of zinc induced by atmospheric corrosion. |
273 |
Atmospheric corrosion of zinc-based materials: runoff rates, chemical speciation and ecotoxicity effects. |
274 |
Aspectos cinéticos de la corrosión atmosférica del acero al carbono, cobre, zinc y aluminio. |
275 |
Efecto de los contaminantes de la atmósfera sobre la corrosión del acero al carbono, cobre, zinc y aluminio. |
276 |
Agravamiento de las reacciones deletéreas en hormigones de cemento Portalnd frente al ambiente marino. |
277 |
Performance of metallic materials in tropical climate. Influence of exposure conditions. |
278 |
Effect of supplementary cementing materials on the concrete corrosion control. |
279 |
La corrosión, factor de importancia en el diseño y proyección de obras. |
280 |
Influence of pre-rusting on steel corrosion in concrete. |
281 |
Experimental studies on the local corrosion of low alloy steels. |
282 |
Stability of reference electrodes embedded in concrete: a statistical evaluation. |
283 |
Diagnóstico de corrosión del acero de refuerzo en tímpanos de edificio ubicado en el malecón habanero. |
284 |
Sistemas de recubrimientos para la industria. |
285 |
Assessment of reinforcement corrosion in a concrete highway tunnel. |
286 |
Corrosión en sistemas de agua potable. |
287 |
Corrosión de estructuras enterradas. |
288 |
Corrosión del aluminio. |
289 |
Corrosión por agua cruda. |
290 |
Integrated system for the inspection and the corrosion monitoring at reinforced concrete structures. |
291 |
Raising the efficiency of electrochemical chloride extraction from reinforced concrete: results and benefits of a practical application. |
292 |
Corrosión bajo aislamientos térmicos. |
293 |
Research methods for atmospheric corrosion of electronic equipment. |
294 |
Protection of Metals in concrete Against Corrosion (ACI 222R-01). |
295 |
Performance of metallic materials in tropical climate. Inlfuence of exposure conditions. |
296 |
Corrosion of Prestressing Steels (ACI 222.2R-01). |
297 |
Influence of Design and Materials on Corrosion Resistance of Steel in Concrete. |
298 |
Estado del Arte sobre umbrales de cloruro para producir corrosión en el hormigón armado e interpretación de perfiles de penetración en medio tropical marino. |
299 |
El recubrimiento, un instrumento eficaz para evitar o contrarrestar la patología de la corrosión del acero en los grandes tanques verticales metálicos. |
300 |
Análisis de los principales factores desencadenantes de la corrosión del acero en estructuras de hormigón armado para la ciudad de Cienfuegos. |
301 |
Role of synthetic filter in delaying steel corrosion cracks and improving bond with concrete. |
302 |
Concrete, Chlorides, Cover and Corrosion. |
303 |
Estudio de corrosión del acero de refuerzo en elementos armados de edificación ubicada en el malecón habanero. |
304 |
Diagnóstico de corrosión en edificaciones de hormigón armado construidas en el primer tercio del siglo XX en Cuba. |
305 |
Diagnóstico de corrosión en edificaciones de hormigón armado construidas en Cuba en la segunda mitad del siglo XX. |
306 |
Una revisión crítica en el uso de ánodos de sacrificio para la protección de estructuras de concreto armado. |
307 |
Estudio comparativo de morteros para reparación de estructuras afectadas por la erosión. |
308 |
Corrosión localizada en concreto y acero galvanizado utilizado como encofrado. |
309 |
comportamiento a flexotracción de elementos de hormigón estructural reparados localmente. |
310 |
Consideraciones sobre la repasividad-rehabilitación de las estructuras corroídas de concreto armado. |
311 |
Evaluación de sistemas de recubrimiento anticorrosivo en acero estructural y su comportamiento según la preparación de la superficie en ambientes con altas humedades relativas y variaciones de temperatura. |
312 |
Efecto de un aditivo orgánico inhibidor de la corrosión en el concreto armado. |
313 |
Cambios en la rigidez y resistencia a la flexión de vigas de concreto dañadas por corrosión del refuerzo. |
314 |
Síntesis de cuestiones fundamentales sobre la corrosión de las armaduras en contacto con materiales cementicios: Prevención y métodos de rehabilitación. |
315 |
Carbonatación del concreto en ambientes marinos y urbanos. |
316 |
la investigación sobre la corrosión del concreto armado en Iberoamérica. Pasado, presente y futuro. |
317 |
Degradación del aluminio anodizado en atmósferas de Iberoamérica de agresividades muy diferentes. |
318 |
Estudio sobre método de recuperación de hormigones carbonatados: proceso de realcalinización. |
319 |
Daño por corrosión en un sótano contaminado con cloruros. |
320 |
Comportamiento de tuberías de concreto frente a la acción del ácido sulfúrico. |
321 |
Almacén de nitrato de amonio. Estudio diagnóstico. |
322 |
Diagnóstico de corrosión de los balcones de edificio de 24 niveles ubicado en el litoral habanero. |
323 |
Cómo prolongar la vida útil de las estructuras de hormigón armado. |
324 |
La importancia del diagnóstico en la reparación de estructuras con armaduras corroídas. |
325 |
Chloride profiles in marine atmosphere zone - Influence of Chloride Deposition Rate. |
326 |
Sulfate attack on Sulfate-resistant Portland Cement containing Limestone Filter. |
327 |
Experiences of the use of concretes of high benefits with arid calcareous, in subjected structures to strong marine aerosol. |
328 |
Concrete Structures Service Life estimation with Chloride Peak Profiles. |
329 |
Application of probabilistic methods to maintenance systems for offshore platforms exposed to marine environments in Brazil. |
330 |
Influence of stainless steel surface treatment on the oxygen reduction reaction in seawater. |
331 |
Guide for the Design, Construction and Repair of Ferrocement (ACI 549.1R-93). |
332 |
Threshold chloride content for corrosion of steel in concrete: A Literature Review. |
333 |
Case studies of corrosion problems influencing electro-electronic equipments in Colombia. |
334 |
Guide for Polymer Concrete Overlays (ACI 548.5R-94). |
335 |
Research methods for atmospheric corrosion of electronic equipment. |
336 |
Guide for Mixing and Placing Sulfur Concrete in Construction (ACI 548.2R-93). |
337 |
Guide for the Use of Polymers in Concrete (ACI 548.1R-89). |
338 |
State-or-the-Art Report Refractory Plastics and Ramming Mixes (ACI 547.1R-89) |
339 |
Performance of metallic materials in tropical climate. Influence of exposure conditions. |
340 |
Guide to Underwater Repair of Concrete (ACI 546.2R-98). |
341 |
Guide for Repair of Concrete Bridge Superstructures (ACI 546.1R-80). |
342 |
Design Considerations for Steel Fiber Reinforced Concrete (ACI 544.4R-88). |
343 |
State-of-the-Art on Fiber Reinforced Concrete (ACI 544.1R-96). |
344 |
Analysis and Design of Reinforced Concrete Bridge Structures (ACI 343R-95). |
345 |
Guide for Concrete Highway Bridge Deck Construction (ACI 345R-91). |
346 |
Guide to formwork for Concrete (ACI 347-01). |
347 |
Code Requirements for Nuclear Safety Related Concrete Structures (ACI 349-01). |
348 |
Code Requirements for Environmental Engineering Concrete Structures (ACI 350-01) and Commentary (ACI 350R-01). |
349 |
State-of-the-Art Report on High-Strength Concrete 9ACI 363R-92). |
350 |
Guide for the Analysis, Design, and Construction of Concrete - Pedestal Water Towers (ACI 371R-98) |
351 |
Design and Construction of Circular Wire- and Strand-Wrapped Prestressed - Concrete Structures (ACI 372R-00) |
352 |
Design and Construction of circular Prestressed Concrete Structures with Cincumferential Tendons (ACI 373R-97) |
353 |
Strength Evaluation of Exixting Concrete Buildings (ACI 437R-91) |
354 |
State-or-the-Art Report on fiber Reinforced Plastic (FRP) Reinforcement for Concrete Structures (ACI 440R-96). |
355 |
High-Strength Columns: State of the Art (ACI 441R-96). |
356 |
Use of Epoxy Compounds with Concrete (ACI 503R-93). |
357 |
Guide to Sealing Joints in Concrete Structures (ACI 504R-90). |
358 |
Guide to Shotcrete (ACI 506R-90). |
359 |
Guide to Portland Cement Plastering (ACI 524R-93). |
360 |
Building Code Requirements for Masonry Structures (ACI 530-99/ASCE 5-99/TMS 402-99). |
361 |
Commentary on Building Code Requirements for Masonry Structures (ACI 530-99/ASCE 5-99/TMS 402-99). |
362 |
Guide for Precast Concrete Wall Panels (ACI 533R-93). |
363 |
Design, Manufacture, and Installation of Concrete Piles (ACI 543R-00). |
364 |
Concrete Repair Guide (ACI 546R-96). |
365 |
Refractory Concrete: Abstract of State-of-the-Art Report (ACI 547R-79). |
366 |
State-of-the-Art Report on Ferrocement (ACI 549R-97). |
367 |
Tilt-Up Concrete Structures (ACI 551R-92). |
368 |
Removal and Reuse of Hardened Concrete (ACI 55R-01). |
369 |
Guide to Durable Concrete (ACI 202.2R-01). |
370 |
Effect of Restraint, Volume Change, and Reinforcement on Cracking of Mass Concrete (ACI 207.2R-95). |
371 |
Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions (ACI 207.3R-94). |
372 |
Compendium of Case Histories on Repair of Erosion-Damaged Concrete in Hydraulic Structures (ACI 210.1R-94). |
373 |
Standard Practice for Selecting Proportions for Normal Heavyweight, and Mass Concrete (ACI 211.1-91). |
374 |
Guide for Submittal of Concrete Proportions (ACI 211.5R-01). |
375 |
Chemical Admixtures for Concrete (ACI 212.3R-91). |
376 |
State-of-the-Art Report on Alkali - Aggregate Reactivity (ACI 221.1R-98) |
377 |
Provisional Standard Test Method for Water-Soluble Chloride Available for Corrosion of Embedded Steel in Mortar and Concrete Using the Soxhlet Extractor (ACI 222.1-96). |
378 |
Corrosion of Prestressing Steels (ACI 222.2R-01) |
379 |
Causes, Evaluation and Repair of Cracks in Concrete Structures (ACI224.1R-93). |
380 |
Joints in Concrete Construction (ACI 224.3R-95). |
381 |
Nondestructive Test Methods for Evaluation of Concrete in Structures (ACI 228.2R-98). |
382 |
Guide for Concrete Floor and Slab Construction (ACi 302.1R-96). |
383 |
Guide for Construction of Concrete Pavements and Concrete Bases (ACI 325.9R-91). |
384 |
Seismic Analysis and Design of Concrete Bridge Systems (ACI 341.2R-97). |
385 |
Routine Maintenance of Concrete Bridges (ACI 345.1R-92). |
386 |
Guide for Widening Highway Bridges (ACI 345.2R-98). |
387 |
Evaluation of Existing Nuclear Safety-Related Concrete Structures (ACI 349.3R-96). |
388 |
Tightness Testing of Environmental Engineering Concrete Structures (ACI 350.1-01) and Commentary (350.1R-01). |
389 |
Concrete Structures for Containment of Hazardous Materials (ACI 350.2R-97). |
390 |
Grouting between Foundations and Bases for Support of Equipment and Machinery (ACI 351.1R-99). |
391 |
Foundations for Static Equipment (ACI 351.2R-94). |
392 |
State-of-the-Art Report on Anchorage to Concrete (ACI 355.1R-91). |
393 |
State-of-the Art Report on Barge-Like Concrete Structures (ACI 357.2R-88). |
394 |
Analysis and Design of Reinforced And Prestressed-Concrete Guideway Structures (ACI 358.1R-92). |
395 |
Guide for the design of Durable Parking Structures (ACI 362.1R-97). |
396 |
Guide for Strucutral maintenance of paking Structures (ACI 362.2R-00). |
397 |
Guide for Evaluation of Concrete Structures Prior to Rehabilitation (ACI 364.1R-94). |
398 |
Service - Life Prediction - State-of-the-Art Report (ACI 365.1R-00). |
399 |
Recommendations for Concrete Members Prestressed with Unbonded Tendons (ACI 423.3R-96). |
400 |
Corrosion and Repair of Unbonded Single Strand Tendons (ACI 423.4R-98). |
401 |
State-of-the-Art Report on Partially Prestressed Concrete (ACI 423..5R-99). |
402 |
Specification for Unbonded Single-Strand Tendons and Commentary (ACI 423.6-01/423.6R-01). |
403 |
Mechanical Connections of Reinforcing Bars (ACI 439.3R-91). |
404 |
Guide for the Design and Construction of Concrete Reinforced with FRP Bars (ACI 440.1R-01). |
405 |
Fracture Mechanics of Concrete: concepts, Models and Determination of Material Properties (ACI 446.1R-91). |
406 |
Standard Specification for Bonding Hardened Concrete, Steel, Wood, Bick, and Other Materials to Hardened Concrete with a Multi-Component EpoxyAdhesive (ACI 503.1-92). |
407 |
Guide for the Selection of Polymer Adhesives with Concrete (ACI 503.5R-92). |
408 |
Committee Report on fiber Reinforced Shotcrete (ACI 506.1R-98) |
409 |
Specification for Shotcrete (ACI 506.2-95). |
410 |
Guide for Precast Cellular Concrete Floor, Roof, and Wall Units (ACI 523.2R-96). |
411 |
Specification for Masonry Structures (ACI 530.1-99/ASCE 6-99/TMS 602-99). |
412 |
Commentary on Specification for Masonry Structures (ACI 530.1-99/ASCE 6-99/TMS 602-99). |
413 |
Effect of the strain rate on stress corrosion crack velocities in face-central cubic alloys. A mechanistic interpretation |
414 |
The characterization and corrosion resistance of Cerium chemical conversion coatings for 304 stainless steel |
415 |
Effect of applied tensile stress on intergranular corrosion of AA2024-T3 |
416 |
Stochastic approach to the pet growth kinetics of Inconel alloy 600 in Cl-ion-containing thiosulphate solution at temperatures 25 - 150 oC by analysis of the potentiostatic current transients |
417 |
Electrodeposition of sol-gel films on Al for corrosion protection |
418 |
Corrosion of structural materials in molten carbonate fuel cells: an overview |
419 |
Analysis of the galvanostatic polarization method for determining reliable pitting potentials on stainless steels in crevice-free condition |
420 |
Electrocchemical oxidation of WC in acidic sulphate solution |
421 |
Characterization of passive films on tin through transient electrochemical techniques |
422 |
Influence of organic matter on orthophosphate corrosion inhibition for copper pipe in soft water |
423 |
Corrosion behaviour of powder metallurgical and cast Al-Zn-Mg base alloys |
424 |
Simulation Tests for Tropical Environments - Comparing Laboratory and Field Test Results |
425 |
Whitening of car bumpers under solar exposure |
426 |
Electro-electronic materials - Case histories |
427 |
Effects evaluation of ultraviolet radiation on polymeric materials on photocontrol devices in Brazilian environments |
428 |
VRLA batteries influence from environment conditions |
429 |
Biodeterioration of electronic components in tropical environments |
430 |
Electrolytic reduction technique in the characterization of anodically formed oxides on copper |
431 |
Copper corrosion by hidrogen sulfide and acetic acid vapor in a flowing mixed gas chamber |
432 |
Precision in processing data from heterogeneous resources |
433 |
Nonoscopic studies of stainless steel electropolishing |
434 |
La durabilidad en obras y proyectos |
435 |
Effect of supplementary cementing materials on the concrete corrosion controlVR |
436 |
Electrochemical chloride extraction (ECE) - A viable technology for extending the service life of chloride contaminated reinforced concrete structures |
437 |
Estado de la normativa en el campo de la durabilidad de las estructuras de hormigón |
438 |
Evaluación de estructuras de concreto reforzado previa a su rehabilitación |
439 |
Experiencias en la realización de estudios diagnósticos de corrosión |
440 |
Current R& D work on the use of stainless steel in construction in FinalndVR |
441 |
Synthesis, structure and stability of MoCl5- graphite intercalation compoundsVR |
442 |
Superstructure and boundary structure instage 4 MoCl5- graphite intercalation compounds |
443 |
Effect of oxygen plasma treatment on gas adsorption behavior and surface structure of carbon spheres derived from phenol resin |
444 |
Investigations about the chloride transformation during the electrochemical chloride extraction process |
445 |
Nueva imprimación anticorrosiva base agua |
446 |
Nuevos productos para el sellado de juntas en infraestructura, edificación e industria |
447 |
Patología de estructuras de concreto reforzado |
448 |
Patología de puentes |
449 |
Productos para la protección anticorrosiva a partir de la Industria Azucarera |
450 |
Reglas de oro de la durabilidad |
451 |
Rehabilitación de estructuras de concreto reforzado |
452 |
Rehabilitación y modernización del Túnel de la Bahía de La Habana |
.gif){kind=small}
